Aviation and space

Optical system simulation for aviation and space: shields, baffles, and stray light control

In aviation and space instruments, measurement quality very often depends not on the imaging optics themselves but on what happens to light outside the ideal optical path. Shields, baffles, and the finish of internal surfaces are meant to limit light that should not reach the detector, and their design has to be verified before the instrument is built.

Optical system simulation for aviation and space: shields, baffles, and stray light control
Request a quote Start a trial

An aviation or space instrument works in conditions in which there are no simple options for corrections after manufacture. That is why the quality of shields and baffles, the finish of internal surfaces, and the control of unwanted light must be verified on a model before they are made in metal.

In this article we focus on the engineering method: how to approach the design of shields and baffles, and how TracePro and OSLO from Lambda Research support such a project. Real examples from NASA missions, including the James Webb Space Telescope, can be found in the article Lambda Research software in space and astronomy projects.

Why light outside the optical path matters in aviation and space

An observing instrument often looks at objects far fainter than bright sources near the field of view, such as the Sun, the Earth, the Moon, or reflections of light from structural elements. Even a small fraction of the light from a bright source that reaches the detector by a path other than the planned one can degrade contrast or obscure the observed object.

That is why a project has to answer not only the question "how does the optical system work?" but also "by what routes can light reach the detector when it should not?".

Where unwanted light comes from

Lambda Research lists several main sources of unwanted light that can be analyzed in TracePro:

  • scattering on optical and mechanical surfaces,
  • aperture diffraction,
  • ghost images, that is, spurious images formed by multiple reflections in lens systems,
  • self-emission in infrared systems, in which elements emit light because of their own temperature,
  • the narcissus effect, that is, the reflection of the detector seen through the system in the infrared.

Each of these phenomena requires a different approach, but all of them can be traced as ray paths in one 3D model. The basics are described in the article Stray light analysis: what it is.

Baffles and shields: what determines their effectiveness

A baffle limits unwanted light in two ways: it blocks the direct path of light from outside the field of view, and it limits light scattered on surfaces that could reach the detector. Its effectiveness is determined, among other things, by:

  • its position relative to the optical path and the detector,
  • the shape of the partitions and their edges,
  • the scattering and absorbing properties of the surfaces,
  • the number and arrangement of elements,
  • the impact on the mass and size of the instrument.

Lambda Research states that TracePro makes it possible to design effective baffles and to determine their optimal position and shape in telescopes, cameras, and other instruments.

TracePro: instrument model and light path analysis

TracePro lets you build a 3D model of the whole instrument: the optical system, mounts, baffles, housing, and detector, with geometry imported from CAD systems. You can assign reflection, absorption, and scattering properties to the surfaces and then trace how light from the given sources reaches the detector.

In its materials on aerospace and defense applications, the manufacturer lists, among others:

  • limiting stray light and designing telescope baffles,
  • modeling polarization and thermal effects,
  • analyzing ghost images,
  • designing multispectral and infrared systems.

TracePro covers a wavelength range from extreme ultraviolet through the visible to the infrared and millimeter waves, which makes it possible to analyze instruments operating in different parts of the spectrum.

Infrared: self-emission, narcissus, and thermal loads

In infrared systems an additional problem appears: optical and mechanical elements themselves emit radiation that depends on their temperature. Such light reaches the detector regardless of what the instrument is observing.

Lambda Research states that TracePro models thermal loads on optical elements and self-emission resulting from temperature, as well as the narcissus effect. In an infrared instrument project it is therefore worth analyzing the temperature distribution and its effect on the background level together with the geometry of the shields.

OSLO: optics design and tolerances

Before analyzing stray light you need a good optical system. In a project, OSLO is used to design and optimize the system, analyze aberrations, and analyze manufacturing and assembly tolerances. The system model can be transferred to TracePro, which accepts the LEN file format of OSLO, and the mechanics, shields, and detector can be added there.

Tolerance analysis is particularly important in aviation and space, because after assembly the system cannot always be corrected. More in the article Tolerance analysis of optical systems in OSLO.

Example workflow for designing shields and baffles

1. Define the illumination scenarios

Determine which bright sources can be located outside the field of view, at what angles, and in what conditions the instrument operates.

2. Define the acceptance criterion

Establish what level of unwanted light at the detector is acceptable for the observation requirements.

3. Design the optical system in OSLO

Optimize the system and check the tolerances before adding the mechanics.

4. Build a 3D model in TracePro

Add the mounts, baffles, housing, and detector, and define the surface properties.

5. Analyze the unwanted light paths

Run simulations for sources outside the field of view at various angles and check which paths reach the detector.

6. Improve the shield geometry

Modify the position, shape, and finish of the baffles and assess the effect of each change on the result.

7. Include thermal effects and polarization

For infrared instruments check self-emission and thermal loads, and for polarization-sensitive systems check polarization effects.

8. Correlate the model with measurements

Compare the results with measurements of real surfaces and components and, if possible, with an independent analysis by a second team.

Which tool for which task

Task Tool
Design and optimization of the optical system OSLO
Tolerance analysis OSLO
Design of baffles and shields TracePro
Stray light and ghost image analysis TracePro
Self-emission, narcissus, and thermal loads in the infrared TracePro
Polarization and birefringence TracePro
Model of the whole instrument with mechanics and detector TracePro

The most common mistakes in shield and baffle design

Analyzing only the optical axis

The greatest threat is often light from outside the field of view, so the analysis must cover a wide range of off-axis angles.

Ideal surfaces

Assuming that a black surface absorbs all the light leads to underestimated predictions. Real surfaces scatter and reflect.

Optics design without mechanics

Mounts, baffles, and the housing are part of the optical path if they can reflect or scatter light.

Ignoring the infrared and temperature

In infrared instruments, self-emission and the narcissus effect can matter more than the scattering of external light.

No acceptance criterion

Without a defined acceptable level of unwanted light, it is hard to judge whether the shield design is sufficient.

Summary

Controlling stray light is one of the most important tasks in the design of aviation and space instruments. It requires a model that covers not only the optical system but also the shields, baffles, mechanical surfaces, the detector, and, in the infrared, thermal effects.

OSLO lets you design and optimize the system and check its tolerances. TracePro carries it over to a 3D model of the whole instrument and enables analysis of unwanted light paths, baffle design, and assessment of thermal and polarization effects. Combining the two tools lets you verify the design before it is built.

Manufacturer resources

Applications of TracePro in stray light, baffle design, and aerospace projects: Lambda Research: Stray Light Analysis with TracePro

Applications of TracePro and OSLO in aerospace, defense, and space: Lambda Research: Aerospace and Defense Projects with TracePro

Analysis of stray light in satellite optical systems: Lambda Research: Analysis of Stray Light in Satellite Optical Systems Using TracePro

Frequently asked questions
Optical system simulation for aviation and space: shields, baffles, and stray light control

What is a baffle and what is it used for in an optical instrument?

A baffle is a mechanical element, most often a shield or partition with a suitable shape and surface finish, that limits the amount of unwanted light reaching the detector. Its position and shape determine how effectively it suppresses light from outside the field of view.

Is TracePro used to design baffles?

Yes. Lambda Research states that TracePro makes it possible to design effective baffles that limit stray light and helps determine their optimal position and shape in telescopes, cameras, and other instruments.

What unwanted light phenomena can be analyzed in TracePro?

According to the manufacturer, these include, among others, scattering, aperture diffraction, ghost images, and self-emission in infrared systems. TracePro also handles the narcissus effect, that is, the reflection of the detector seen through the system in the infrared.

Does TracePro take thermal effects into account?

Lambda Research lists modeling of thermal loads on optical elements and of self-emission resulting from element temperature among the capabilities of TracePro, which matters in infrared systems.

What is OSLO used for in such a project?

OSLO is used to design and optimize the optical system, analyze aberrations, and perform tolerance analysis. The OSLO model can be transferred to TracePro to check how the system behaves together with the mechanics, shields, and detector.

Does stray light simulation replace testing the instrument?

No. Simulation lets you make design decisions at an early stage and compare many variants, but its results should be correlated with measurements of real surfaces, coatings, and components.

Ready to check it on your own project?

Ask our engineers for a tailored quote or start a free trial today.

Request a quote Start a trial

← All articles